- Home
- The Company
- Products
- Applications
- Support
- News
- Contact Us
Current Monitors
Clamp-On Current Monitors
Capacitive Voltage Dividers
High Voltage Pulse Transformers
Beam Instrument
Plasma Research
EMI Test Applications
Lightning Discharge
Medical Equipment
Particle Acceleration
Capacitive Discharge
Power Monitoring
Surge Test Applications
Model 7655
New line of Wide-Band Clamp-on Current Monitors features a 4 inch or 6 inch aperture in a demountable configuration for easy use on large conductors. The Pearson’s wide-band current monitors frequency response and 1% accuracy is featured in all of the models.
The model 7655 has a sensitivity of 0.1 V/A, a 3dB bandwidth from 10 Hz to 4 MHz, and a 175 Ampere rms current rating. Accuracy of 1%, or better, is obtainable across the mid-band. Pulse currents up to 5,000 Amperes and rise times down to 100 nanoseconds can be viewed faithfully. Other new large aperture clamp-on models feature a range of transfer impedance from 0.01 V/A to 1.0 V/A. Electrical specifications range from rise times as short as 25 nanoseconds, or droop as low as 0.001% per microsecond. All of the new large aperture clamp-ons are featured in our Clamp-on Current Monitor section along with existing custom and stock designs.
The Particle Accelerator community uses Pearson Current Monitors for a variety of applications in the area of high . . .
|
The medical equipment industry uses Pearson Current Transformers in several applications. These include medical. . .
|
The Power Industry uses Pearson Current Transformers to measure transients in switching gear and the observation of. . .
|
Pearson Clamp-on Current Probes are used to make accurate AC current measurements to meet many of the EMI standards. . .
|
Pearson Current Probes are used by the Semiconductor and Semiconductor Equipment Industry to make measurements at. . .
|
Pearson Current Monitors are used to view faithful waveforms and make accurate current measurements from a capacitive. . .
|
Wide Band Current Probes measure surge and in-rush currents for EMC and other industries. A typical requirement. . .
|
Broad Band Current Transformers | Monitors are used to characterize lightning strikes at the Kennedy Space Center and leading. . .
|
Custom Wide Band Current Monitors are use beam tube applications with our large aperture clamp-on Current Monitors. . .
|